| 1 |
|
| 2 | TOOLS REQUIRED |
|
| ||
| CARTON INVENTORY | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1. | Instruction manual (this document) |
|
| 1. | Ladder |
| ||
| 2. | Stop collar |
|
| 2. Adjustable wrench for |
| |||
| 3. | Clamp bracket |
|
|
| on the door |
| ||
| 4. | Release handle, cord and risk of entrapment | card | 3. | 8 mm socket, 10 mm socket and 13 mm extended |
| |||
| 5. Transmitters (2) |
|
|
| socket and socket wrench |
| |||
| 6. | Wireless wall button |
|
| 4. | 300 mm socket extension (for minimum |
| ||
| 7. | Hardware bag |
|
|
| installations) |
| ||
| 8. | Weight bar |
|
| 5. | Drill and 5.5 mm drill bit |
| ||
| 9. | Clamp plate |
|
| 6. |
| |||
| 10. Warning label and risk of entrapment label |
|
| 7. | Marker pen |
| |||
| 11. Opener |
|
| 8. | Door stand or similar device to safely support | door | |||
|
|
|
|
|
|
| (not shown) |
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
13 mm, 10 mm, 8 mm
11
5.5 mm
3DOOR REQUIREMENTS
The maximum allowable door height is 4.5 m with a maximum curtain area of 16.5 m²* (MR650EVO)
(MR850EVO) (door height in metres multiplied by the width in metres). The door must be spring balanced.
*The Protector System™ (IR Beams) must be installed if the force at the edge of the closing door exceeds
400 N (40 kgf). Door axle diameter must not exceed 35 mm.
Minimum distance from | 95 mm |
edge of curtain to edge of |
door bracket 45 mm
Direct clamping | Independent |
method | clamping method |
95 mm
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller do drum is on the edge of the curtain or is a smaller diameter, additional clearance may be required.
If the drum is more than 60 mm from the curtain edge or of a smaller diameter, an extension pole kit may be required.
Different drum and bracket types may result in the minimum side room clearance not being possible a extension poles being required. Ensure there is a power point near the opener.
2