2 READ

Please read this entire manual carefully before you set up the thermometer and begin to use it. In this way you can become familiar with the features and get the most benefit from it.

3 ACTIVATE BATTERY

(1) CR2032 “coin-style” lithium battery is included and pre-installed.

A protective strip that prevents the battery from draining during shipping must be removed from the battery compartment before you can begin using your Digital WIndow Thermometer.

1)Remove the two small Phillips type screws with a small Phillips screwdriver

2)Remove the battery compartment carefully as to not loose the screws.

3)Remove the small plastic tab from the battery compartment.

4)Replace the battery compartment cover and screws, making sure the battery is still installed correctly.

NOTE: It is recommended that a lithium type battery always be used in the Digital Window Thermometer to ensure a long battery life and better cold weather operation than regular alkaline batteries.

4 CHOOSE WHERE TO USE THE WINDOW THERMOMETER

The Acu-Rite® Digital WIndow Thermometer can be used almost anywhere a reliable temperature reading is needed. When choosing where to place the thermometer, keep the following in mind:

• When placing, clean the surface area where the suction cups will adhere to

thoroughly. The suction cups will adhere to surfaces like glass or smooth plastic best.

• For the most accurate reading, place the thermometer in an area OUT OF DIRECT

SUNLIGHT.

• The Digital Window Thermometer is weather-resistant, but is not WATERPROOF.

HOME USE

ROTATE SUCTION CUPS

FOR OUTDOOR TEMPERATURE

READING PLACEMENT

PLACE INSIDE

PLACE OUTSIDE

WINDOW FOR INDOOR

WINDOW FOR OUTDOOR

TEMPERATURE READING

TEMPERATURE READING

5 DIGITAL WINDOW THERMOMETER FEATURES

WEATHER RESISTANT

TEMPERATURE MEASUREMENT

BATTERY COMPARTMENT

RANGE IS -4ºF TO 140ºF

Place in an area out of direct weather elements, such as under an overhang or on

a recessed or inset window surface when placing outdoors.

• In the case of very cold temperatures outdoors, the thermometers suction cups may

become stiff and loose suction. It is recommended that the window thermometer be

brought indoors in extremely cold weather to prevent the unit from falling.

• The suction cup mounting bracket rotates 270º to allow mounting placement on

various angles of surfaces. The Digital Window Thermometer can be mounted on any

SMOOTH FLAT SURFACE and used anywhere a temperature reading is needed,

provided the previous mounting suggestions are followed.

• When removing the Digital WIndow Thermometer from a mounting surface, lift tab of

suction cup itself. DO NOT pull on the case or the display to remove the thermometer

from a mounting surface as this may cause damage to the rotating suction cup

bracket.

After you have decided where to place the unit, be sure the mounting surface is clean before mounting. After the Digital WIndow Thermometer is mounted, consider rotating the display SLIGHTLY down or up to provide the best viewing angle height for where the location the thermometer will be viewed most from.

SUCTION CUPS

ROTATE 270º FOR

PLACEMENT IN

VARIOUS DIRECTIONS

AND LOCATIONS

SOON

BATTERY

WHEN THE

CHANGE

 

BATTERY

 

IS LOW, THE

UNIT WILL DISPLAY “CHANGE BATTERY SOON.”

MINIMUM & MAXIMUM MEMORY RECORDS THE LOWEST AND HIGHEST TEMPERATURES OBSERVED IN THE PREVIOUS 24 HOURS. THE MEMORY WILL CLEAR ITSELF EVERY 24 HOURS.

note: if the unit loses power, the memory will clear.

LARGE EASY-TO-READ

TRANSPARENT LCD

DISPLAY

Page 2
Image 2
Chaney Instrument 00603 instruction manual Read, Activate Battery, Choose Where to USE the Window Thermometer, Home USE