ASSEMBLY

1

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining

 

casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.

 

After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

 

 

 

 

Non-lock caster

A

 

 

 

Bent U pin

 

 

 

 

Locking caster

 

 

 

 

 

 

 

 

Front

Bottom shelf

Rear

2Attach side panels to bottom shelf using three 1/4-20x1/2”screws, 7mm lock washers, and 7mm flat washers per panel.

IMPORTANT: Panel with large hole must be on left side of bottom shelf.

Left side panel (with large hole)

Make sure side panels are pushed as far to the

rear of bottom shelf as possible before fully tightening screws.

1/4-20x1/2” screw

7mm lock washer 7mm flat washer

Right side panel

13

Page 13
Image 13
Char-Broil 463232011 manual Assembly, Front