ASSEMBLY – Model No. 463248708
1
Attach the two locking casters at the rear of the bottom shelf and the two fixed casters at the front. Use the provided caster wrench to fully tighten casters.
Fixed caster
Locking caster
Front
Bottom shelf
Rear
Attach side panels to bottom shelf using three
2 7mm lock washers, and 7mm flat washers per panel shown A.
IMPORTANT: Panel with large hole must
Be on left side of bottom shelf.
Unscrew Hex Nut and attach EI Module and Heat Shield to right
side panel shown B.
A
Left side panel (with large hole)
Right side panel
Make sure side panels are pushed as far to the rear of bottom
shelf as possible before
fully
tightening screws.
1/4-20x1/2”
7mm lock washer
7mm flat washer
B
EI Module
Hex Nut
Heat Shield
Battery Cap
Right side panel
14 • 463248708
