Char-Broil 463248708 manual Assembled to Cart, Installation is complete in later steps

6

Insert front brace under control panel and between cart side panels with door magnets towards the top. Secure using four 1/4-20x1½”screws, 7mm lock washers, and 7mm flat washers, two on each side.

NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN

ASSEMBLED TO CART.

7mm flat washer

7mm lock washer

1/4-20x1½” screw

Front brace

7

On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in lower holes, using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer on each side. Do not fully tighten screws until side shelf

installation is complete in later steps.

1/4-20x1½”	7mm lock	7mm flat
screw	washer	washer

Rear upper panel

16 • 463248708