463248708 • 15
5This step requires two people

to lift and position grill head

onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
Grill head
Regulator hose
3Place lower back panel between side panels at rear of bottom shelf. Make sure the slots are positioned as shown (A). Secure
lower back panel to side panels using two 1/4-20x1/2” screws, 7mm lock washers, and 7mm flat washers on each side.
A
Lower back panel
1/4-20x1/2” screw
7mm lock washer
7mm flat washer
A
Upside
Downside
Left
Right
4
Door Brace

AB

Tank Exclusion
Wire Frame C
Insert wire ends into lower back panel (A). Attach front right side of wire shelf to the right side panel with one
#8-32x3/8” screw, 4mm flat washer and 4mm lock washer (B). Leg attaches to bottom shelf with a 4mm flat washer and
4mm lock washer and a #8-32x3/8” screw (C).