ASSEMBLY

1

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

Non-lock caster

Locking caster

Front

Bottom shelf

Rear

A

Bent U pin

2

Attach side panels to bottom shelf using three

1/4-20x1/2”screws per panel.

1/4-20x1/2” screw

 

IMPORTANT: Panel with magnet must

 

be on left side of bottom

shelf.

Left side panel (with a hole)

Magnet

Make sure side panels are pushed as far to the

rear of bottom shelf as

possible before fully tightening screws.

Right side panel

Front

13

Page 13
Image 13
Char-Broil 463250211 manual Front, Assembly