11

Connect each of the wires from main burner electrodes into the back of the Electronic Ignition Module. Total (2) connections. Connect the two wires [(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module.

Total (2) connections.

NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a),(b).

(a)

1

2

(b)

12

Attach door handle to door using two #10-24x3/8”screws, 5mm lock washers and 5mm flat washers, shown A.

Insert hinge pin on bottom of door into hole in bottom shelf. Press upper hinge pin in front brace, align hinge hole on top of door, and release hinge pin into door.

A

Door

 

#10-24x3/8” screw

 

5mm lock washer

 

5mm flat washer

handle

Door

 

Door

PRESS

Top of door

Hinge pin on bottom of door

19

Page 19
Image 19
Char-Broil 463250211 manual Door