Char-Broil 463250511 manual Upper back panel

5

Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and facing the front.

Secure upper holes using one 1/4-20x1½”screw and fiber washer on each side. Secure lower holes using one 1/4-20x1½”screw on each side.

fiber washer

Door

Hinge Pin

Front brace	1/4-20x1½”
	screw

Note: some parts omitted for clarity of illustration

6	On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel in
	lower holes using one 1/4-20x1½”screw and fiber washer on each side.

Do not fully tighten screws until side shelf installation is complete in later steps.

1/4-20x1½”fiber washer screw

Upper back panel

15