Char-Broil 463257010 manual Upper back panel

5

On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in lower holes, using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer on each side. Do not fully tighten screws until side shelf installation is complete in later steps.

1/4-20x1½”	7mm lock	7mm flat
screw	washer	washer

Upper back panel

6

Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach right side shelf using four 1/4”-20x3/4”screws, 7mm lock washers,
7mm flat washers, 1/4” nuts, shown A. Attach rear of shelf using one
1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer in lower hole, shown B.
Attach front of shelf and fascia using one #8x3/8” self-tapping screw and large
flat washer, shown C.	A
B

7mm flat		1/4-20x1½”
			screw
washer	7mm lock				1/4-20x3/4”
	washer
					screw
					7mm flat
				1/4”nut	7mm lock washer
					washer

Bracket

C

#8x3/8” self-tapping screw

Fascia, right side shelf

Large flat washer

19