Char-Broil 463262211 manual Temperature gauge stem

	Pull out the two knobs from control panel. Insert temperature gauge stem into the bigger hole above knob bezel, shown A.
5
	Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, shown B/C.
	Re-install the two knobs.	Temperature gauge stem

Temperature gauge

Control panel Knob bezel

Knob

A

B

Back of the panel

C

	Attach right side fascia to right side shelf using two #10-24x3/8”screws, 5mm lock washers and 5mm flat washers.
6
	Only right side shelf shown for assembly, install left side shelf with fascia in the same way.

5mm flat washer

5mm lock washer #10-24x3/8” screw

Right side shelf

Right side fascia

15