Char-Broil 463270911 manual Upper back panel

5

On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in lower holes, using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer on each side. Do not fully tighten screws until side shelf installation is complete in later steps.

1/4-20x1½”	7mm lock	7mm flat
screw	washer	washer

Upper back panel

6

Insert flange on right side shelf into side shelf brackets on side of firebox.

Attach right side shelf using three 1/4”-20x3/4”screws, 7mm lock washers, 7mm flat washers, 1/4” nuts, shown A. Attach rear of shelf using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer in lower hole, shown B. Attach front of shelf and fascia using one #8x3/8” self-tapping screw and large flat washer, shown C.

Attach front of shelf and fascia using one 1/4”-20x3/4”screw, 7mm lock washer, 7mm flat washer and 1/4” nut, shown D/C.

Bracket

Fascia, right side shelf

Main control panel

B

1/4-20x1½”

7mm flatscrew washer 7mm lock

washer

C

#8x3/8” self-tapping

screw

Large flat washer

1/4”nut

7mm lock washer

7mm flat washer

A

	1/4-20x3/4”
	screw
1/4”nut	7mm flat
	washer
	7mm lock
	washer

D Back of main control panel

Igniter Switch

1/4-20x3/4”

screw

15