3

Place lower back panel between side panels at rear of bottom shelf. Make sure the slots are positioned as shown (A). Secure lower back panel to side panels using two 1/4-20x1/2”screws, 7mm lock washers, and 7mm flat washers on each side.

Lower back panel

Upside

 

1/4-20x1/2” screw

Left

7mm lock washer

7mm flat washer

Right

A

Downside

4

Insert wire ends into lower back panel (A). Attach front right side of wire shelf to the right side panel with one #8-32X3/8"screw, 4mm lock washer and 4mm flat washer (B). Leg attaches to bottom shelf with a #8-32X3/8"screw and a 4mm lock washer and 4mm flat washer (C).

B

A

C

5

This step requires two people to lift and position grill head onto cart.

Carefully lower the grill head onto the

 

cart, aligning slots at bottom of grill head

 

with posts on cart side panels. Make

 

sure the regulator hose is hanging

 

outside the cart. Grill head must face

 

open side of cart.

Grill head

Regulator hose

463271108 • 15

Page 15
Image 15
Char-Broil 463271108 manual Left 7mm lock washer 7mm flat washer Right