Char-Broil 463666510 manual Assembly, Align holes

ASSEMBLY

1

Insert lower cart legs into cart legs, make sure the holes for tank exclusion wire face inside, and the holes on lower cart legs are aligned to the lower holes on cart legs. Position leg assemblies as shown below. Attach front panel, side support braces and back brace to legs using eight 1/4’’-20x2” carriage bolts and four 1/4’’-20 tee knobs. Do not fully tighten all tee knobs until step5.

Front panel

Side support

brace

1/4’’-20x2”

Carriage Bolt

Qty. 8

Back brace

1/4’’-20 Tee Knob

Qty. 8Holes for tank exclusion wire face inside

Align holes

2

Turn assembly upside-down. Insert 5/16’’ axle bolts into wheels. Facing the back, position tank support bracket between left legs. Insert axle bolt through leg and bracket and secure with hitch pin.

5/16”

5/16’’ Axle Bolts

Hitch Pin

Qty. 2

Wheel

Tank support

bracket

Axle Bolt

Qty. 2

“Cone” side of wheel against leg.

17