Char-Broil 463666510 manual Qty

3

Attach control panel/ HVR assembly to firebox with two #10-24x1/2” machine screws, 7x15 fiber washers, and #10-24 flange nuts (A). Place heat shield onto burner venturi tubes, then insert burner/ heat shield through venturi holes on firebox. Make sure ignitor wire go through the hole on heat shield and firebox as shown (B). Make sure valve and venturi tube align. Attach venturi clips. Attach ignitor wire to ignitor (C).

A

Valve Venturi tube

C

#10-24x1/2”	Ignitor	Venturi clip	Ignitor wire
Machine Screw
	Control Panel
Qty. 2			Heat Shield

7x15 Fiber Washer

Qty. 2

#10-24 Flange Nut	Burner	Ignitor
Qty. 2	Assembly	wire

HVR Assembly

Firebox

Venturi clip

Qty. 2

Turn cart upright. Place cart in the upright position. Place

4 firebox assembly onto cart, making sure that regulator hose hangs inside cart and control panel overlaps front panel. Secure firebox to cart using four #10-24x1-1/4’’ carriage bolts, 7x15 fiber washers and #10-24 wing nuts.

#10-24x1-1/4’’ Carriage Bolt Qty.4

7x15 Fiber Washer

Qty. 4

Firebox

assembly

Control

panel

Front panel

#10-24 Wing Nut

Qty.4

18