Char-Broil 463741209 manual Assembly

ASSEMBLY

1

(A)Place leg shelf support onto leg with leg extender. Attach each side with #10-24x1-3/4" machine screw and

#10-24" wing nut.

(B)Attach one support bar to legs with #10-24x1-3/4" machine screws and #10-24 wing nuts.

NOTE: Do not tighten screws until Step 5.

Leg Shelf Support

A

Support Bar

B

#10-24x1-3/4" Machine Screw

Qty. 6 Right leg

Pay attention to the orientation of

Right Leg during assembly

#10-24

Wing Nut

Qty. 6

2

(A)Place the leg shelf support with match holder onto leg as shown. Attach another leg support to other leg with no leg extender. Attach each side with #10-24x1-3/4" machine screw and #10-24" wing nut.

(B)Attach one support bar to the upper part of leg with #10-24x1-3/4" machine screws and #10-24 wing nuts.

NOTE: Do not tighten screws until Step 5.

Leg Shelf Support

Support Bar

	Match Holder
	A
#10-24x1-3/4"	B
Machine Screw
Qty. 6
	Left leg
#10-24	Pay attention to the
	orientation of Right Leg
Wing Nut	during assembly
Qty. 6

17