Char-Broil 463741209 manual Secure with #10-24x1/2 screws and #10-24 wing nuts

5

(A)Place front panel with holes side on top, attach to front of cart with #10-24x1/2" machine screws in lower holes and with push fasteners in upper holes.

(B)You will need to remove the wing nuts and screws installed in step 1A to attach another front panel. And use push fasteners to attach the front panel on the lower holes. Tighten all screws from previous steps.

Holes on top Push Fastener

Upper hole

#10-24X1/2" Machine

Lower hole

A

Screw

Back

B

Wing nut

#10-24X1-3/4” Machine Screw

Back

Push Fastener	#10-24X1/2"
Qty. 4	Machine Screw
	Qty. 2

Push

Fastener

Back

6

Hook the tank exclusion wires onto back of front panels and rear rail as shown.

Secure with #10-24x1/2” screws and #10-24 wing nuts.

Tank exclusion

wire

#10-24X1/2”	#10-24
Machine Screw	Wing Nut
Qty. 2	Qty. 2

#10-24X1/2” Machine Screw

Wing nut

19