Char-Broil 466247310 manual Grill head Regulator hose

3

Place lower back panel between side panels at rear of bottom shelf. Make sure the slots are positioned as shown (A). Secure lower back panel to side panels using two 1/4-20x1/2”screws, 7mm lock washers, and 7mm flat washers on each side.

7mm flat washer 7mm lock washer 1/4-20x1/2” screw

	Lower back panel
		The vertical flange should be on left side
A		when the lower back panel is properly
		installed

Vertical flange

4

This step requires two people to lift and position grill head onto cart. Carefully lower the grill head onto the cart, aligning slots at bottom of grill head with posts on cart side panels. Make sure the regulator hose is hanging outside the cart. Grill head must face open side of cart.

Grill head

Regulator hose

15