16
Connect each of the wires from the main burner electrodes, and sideburner electrode to the back of the electronic ignition module. Total (5) connections. Connect the two wires {(a) and (b)} from the switch wiring harness to the back of the electronic ignition module. Total (2) connections, shown A.
Release the cap from electronic ignition module on cart right side panel. Insert AA battery into ignition module, negative
On back of right side fascia, open battery box by sliding its cover. Put two AA batteries in the box and then replace the cover,shown C.
A
wire
| (a) | |
3 | 1 | |
4 | ||
2 | ||
5 | (b) | |
|
Electronic ignition module
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a), (b).
B
Right | side | panel |
| ||
|
|
- 
+
AA battery Cap
C
AA battery
Battery box
Cover
24
