20
LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use & Care section). Once cylinder has been filled and leak checked, place cylinder into notches in tank support bracket. Make sure cylinder valve is facing front of grill. Slide tank retainer wire over cylinder collar and tighten tee knob. Regulator hose should be above side support brace. See
Use & Care section of this manual to perform the “Burner Flame Check” and for important safety instructions before using.
CAUTION
Cylinder valve must face to front of cart once tank is attached. Failure to install cylinder correctly may allow gas hose to be damaged in operation, resulting in the risk of fire.
Correctly Installed
LP cylinder.
Regulator
LP Cylinder
(not included)
Always keep LP cylinders in upright position during use, transport, and storage.
473721007 • 23
