Section D Con’t.
D5
Pull the Rotisserie Control Knob off of Valve Stem.
Remove screws and washers that secure Bezel to the Control Panel. Save removed Bezel for converting back to LP Tank Gas.
Install new Natural Gas Bezel provided with Kit (see illustration below) in place of old Bezel onto Control Panel, and secure using previously removed screws and washers. Assure proper alignment with control knob before fully tightening. Note: New bezel will change the rotation for the control knob to properly control ignition and flames for your grill.
Press Control Knob back onto Valve Stem. Make adjustments needed to Bezel for free movement of Control Knob.
OFF
Hi
Valve
Stem
Low
Lock Washers
Med
Small Bezel
Screws
Bezel
Rotisserie Burner
Control Knob
Section E
E1
Open Sideburner Lid and remove the Sideburner Cooking Grate.
Remove Screw from Sideburner Electrode. See illustration below.
Slide Sideburner Electrode out of Collector Box.
Sideburner cooking grate
Sideburner
Electrode
NOTE:
Sideburner lid shown removed for clarity only. Do not remove sideburner lid during conversion.
Screw
Collector box
Sideburner
Electrode
15
