Operation
Offset Mode
Entering Offset
Mode
Pan Motor
Tilt Motor
Shutter Motor
Color 1 Motor
Color 2 Motor
Cyan Dichroic Flag
Magenta Dichroic Flag Motor
Yellow Dichroic Flag
3200 K Filter Dichroic Flag
Zoom Motor
The Offset Mode provides fine adjustments for the home position of all the moving parts in the optical path as well as the pan and tilt movements. The home position is where the moving parts go when you reset them. In their corresponding home position, the moving parts should not show any border or reduce the light output. It they do, use the Offset Mode to fine adjust them.
1)Press <MENU> to enter the regular Menu Mode.
2)Press <ENTER> for more than three seconds to enter the Offset Mode (the Offset Mode menu will show).
4)Press <MENU> to exit once you are done with offset adjustments.
1)Select Pan and press <ENTER> (a pop up window will open).
a)Select the new value
b)Accept the new value.
1)Select Tilt and press <ENTER> (a pop up window will open).
a)Select the new value
b)Accept the new value.
1)Select Shutter and press <ENTER> (a pop up window will open).
a)Select the new value (0~255).
b)Accept the new value.
1)Select Color 1 and press <ENTER> (a pop up window will open).
a)Select the new value
b)Accept the new value.
1)Select Color 2 and press <ENTER> (a pop up window will open).
a)Select the new value
b)Accept the new value.
1)Select Cyan and press <ENTER> (a pop up window will open).
a)Select the new value (0~255).
b)Accept the new value.
1)Select Magenta and press <ENTER> (a pop up window will open).
a)Select the new value (0~255).
b)Accept the new value.
1)Select Yellow Filter and press <ENTER> (a pop up window will open).
a)Select the new value (0~255).
b)Accept the new value.
1)Select 3200 K Filter and press <ENTER> (a pop up window will open).
a)Select the new value (0~255).
b)Accept the new value.
1)Select Zoom and press <ENTER>.
a)Select the new value (0~255).
b)Accept the new value.
Legend™ 1200E Wash User Manual Rev. 02e |
