Mounting Before mounting the product, read and follow the Safety Notes.
Orientation | The Intimidator™ Spot LED 150 may be mounted in any position; however, make sure |
| adequate ventilation is provided around the product. |
Rigging | · Before deciding on a location, always make sure there is easy access to the product |
| for maintenance and programming purposes. |
| · Make sure that the structure or surface onto which you are mounting the product |
| can support the product’s weight. See the Technical Specifications section of this |
| manual for weight information. |
| · When mounting the product overhead, always use a safety cable. Mount the |
| product securely to a rigging point, whether an elevated platform or a truss. |
| · When rigging the product onto a truss, you should use a mounting clamp of |
| appropriate weight capacity. The bracket has 13 mm holes, which are appropriate |
| for this purpose. |
| · When power linking multiple products, you must always consider the length of the |
| power linking cable and mount the products close enough for the cable to reach. |
| · The rubber feet also serve as floor supports/allow for surface mounting. When |
| mounting the product on the floor, make sure that the product and cables are away |
| from people and vehicles. |
Mounting Diagram
Bracket
Attachement (x2)
Rubber Feet (x4)
Safety Loop
Attachment Point
Page 8 of 18 | Intimidator™ Spot LED 150 User Manual Rev. 8 |
