5.TECHNICAL INFORMATION
Product
Maintenance
Dust build up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
·Unplug the product from power.
·Wait until the product is at room temperature.
·Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
·Clean all external optics with a mild soap solution,
·Apply the solution directly to a soft,
·Softly drag any dirt or grime to the outside edges of the external optics.
·Gently polish the external optics until they are free of haze and lint.
Always dry the external optics carefully after cleaning them.
Do not spin the cooling fan/fans using compressed air because you could damage it/them.
Page 16 of 18 | Intimidator™ Spot LED 150 User Manual Rev. 8 |
