Appendix

5.APPENDIX

DMX Primer

There are 512 channels in a DMX connection. Channels may be assigned in any manner. A fixture capable of receiving DMX-512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller.

There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required. Choosing a start address should be planned in advance. Channels should never overlap. If they do, this will result in erratic operation of the fixtures whose starting address is set incorrectly. You can however, control multiple fixtures of the same type using the same starting address as long as the intended result is that of unison movement or operation. In other words, the fixtures will be slaved together and all respond exactly the same.

DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is where the DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in which the fixtures are connected is not important and has no effect on how a controller communicates to each fixture. Use an order that provides for the easiest and most direct cabling. Connect fixtures using shielded two conductor twisted pair cable with three pin XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+).

Fixture Linking

 

DMX connector configuration

 

 

COMMON

 

1

DMX +

INPUT

3

 

 

2

 

 

 

DMX -

 

1

Resistance 120

 

ohm ¼ W between

 

3

 

pin 2 (DMX -) and

 

2

 

pin 3 (DMX +) of

 

 

 

 

the last fixture.

1

 

 

3

OUTPUT

 

2

Termination reduces signal errors and to

avoid signal transmission problems and interference, it is always advisable to connect a DMX signal terminator.

Note!

If you use a controller with a 5-pin DMX output connector, you will need to use a

 

5-pin to 3-pin adapter.

 

The chart below details a proper cable conversion:

3-PIN TO 5-PIN CONVERSION CHART

Conductor

3-Pin Female (output)

5-Pin Male (Input)

Ground/Shield

Pin 1

Pin 1

 

 

 

 

 

Data ( - )signal

Pin 2

Pin 2

 

 

 

Data ( + ) signal

Pin 3

Pin 3

 

 

 

Not Used

 

Pin 4

 

 

 

Not Used

 

Pin 5

 

 

 

LED-PAR200B User Manual

9

2010-03-09/15:03

Page 8 Page 10
Page 9
Image 9
Chauvet 200B user manual Appendix, DMX Primer, Fixture Linking
Page 8 Page 10

200B specifications

The Chauvet 200B is a professional-grade LED moving head fixture that stands out in the realm of stage lighting, known for its versatility and performance. This compact yet powerful light is designed to meet the demands of various events, including concerts, corporate functions, and theatrical productions. Its robust features, advanced technologies, and user-friendly interface make it a popular choice among lighting designers and technicians alike.

One of the key features of the Chauvet 200B is its bright output, which is facilitated by a high-quality LED source. This allows it to deliver impressive luminosity while consuming less power compared to traditional halogen lights. The fixture typically boasts a wide color spectrum, enabling users to create vibrant and dynamic lighting effects. With a color temperature adjustable feature, it can seamlessly transition from warm to cool tones, enhancing the visual atmosphere of any production.

The Chauvet 200B often incorporates a smooth pan and tilt movement, enabling precise positioning and sweeping motions. This is essential for creating dynamic light shows and for following performers on stage. Additionally, the fixture typically comes with built-in lighting effects, such as strobe functionality and various beam angles, which expand creative possibilities further.

In terms of technology, the Chauvet 200B is designed with user-friendly controls, often featuring DMX compatibility, allowing for seamless integration into existing lighting setups. Users can program intricate light shows, showcasing color changes, movement patterns, and effects with minimal effort. The fixture is typically designed for reliability, featuring a robust housing that can withstand the rigors of touring and venue installations.

Another noteworthy characteristic of the Chauvet 200B is its efficient cooling system, which helps to prolong the life of the LED components while ensuring optimal performance. The lightweight design allows for easy transport and installation, making it a favorite among event facilitators and production crews.

In conclusion, the Chauvet 200B is a highly capable moving head fixture that offers a blend of brightness, versatility, and technological sophistication. Its features cater to a wide range of lighting applications, making it an essential tool for professionals aiming to create stunning visual experiences on stage.
Top Page Image Contents