4.OPERATING INSTRUCTIONS
The LEDsplash™ 200B is a DMX controllable, full RGB color mix par can made up of highly efficient and super bright LEDs. All red, green and blue LEDs can be controlled separately allowing the creation of an unlimited range of colors.
The LEDsplash™ 200B can operate in
Master/Slave Mode
This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto Mode.
1)Set dipswitches position to Sound Active or Auto Mode.
Mode | Dipswitches |
Sound Active | 1~10 = Off, switch set to Music |
Auto Mode | 1~10 = Off, switch set to Auto |
2)The unit will react to the low frequencies of music via the internal microphone in Sound Active mode, or the unit will auto change in Auto Mode.
3)Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
Daisy Chain Connection
1.Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.
2.Connect the end of the cable coming from the first fixture which will have a (female)
DIP Switch Options
FUNCTIONS | DIP SWITCHES ( ON ) | NOTES & DESCRIPTION | |
|
|
| |
|
| Music/Auto switch | |
Color change program | None | Music: | |
(Auto/Music) | sensitivity | ||
| |||
|
| Auto: sound adjustment know sets speed of program | |
| 1 | Low Intensity | |
Red LEDs | 2 | Medium Intensity | |
| 3 | Full Intensity | |
| 4 | Low Intensity | |
Green LEDs | 5 | Medium Intensity | |
| 6 | Full Intensity | |
| 7 | Low Intensity | |
Blue LEDs | 8 | Medium Intensity | |
| 9 | Full Intensity |
7 |