Control Panel Functions (cont.)
DMX
This operating mode will allow you to control the Arena Hazer™ 2 with an external DMX controller. You must set the starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
1.Press <FUNCTION>.
2.Using <FAN/ADDRESS> + and - buttons, select the desired DMX address.
3.Press <FUNCTION>.
DMX Channel Values
CHANNEL VALUE
FUNCTION
1 |
|
| Blower | |
000 | 255 | 0~100% | ||
| ||||
2 |
|
| Haze | |
000 | 255 | 0~100% | ||
|
Adjustable Blower Angles
The blower output angle may be adjusted by using a knob located on the side of the hazer.
1.Loosen the knob by turning it
2.Using the knob as a handle, adjust the angle either up or down.
3.Tighten the knob by turning it clockwise.
Blower Angle
Adjustment knob
Arena Hazer™ 2 User Manual | 10 | 4/20/2010 4:23 PM |
