Chauvet 560 user manual Stand-alone Operation Master/Slave Display Mode Software Version

Operation

Stand-alone

Operation

Master/Slave

Display Mode

Software Version

1.Go to MENU > INTRO > RUN.

2.Select a stand-alone operation mode (AUTO 1, AUTO 2, CUSTOM, SOUND 1, SOUND 2, or TEST).

Of all the stand-alone operation modes indicated above, only CUSTOM is editable (see Edit Custom).

The Master/Slave mode enables one or more Q-Spot™ 560-LED products (the slaves) to simultaneously duplicate the output of another Q-Spot™ 560-LED (the master), without a DMX controller, whether in auto/custom or static modes,.

1.Set the master unit:

a)Select a stand-alone mode, as indicated above.

2.Set each of the slave units:

a)Go to MENU > INTRO > RUN.

b)Select SLAVE.

∙Do not connect a DMX controller to the master or slave products.

∙The master unit should be the first unit in the DMX daisy chain.

1.Go to MENU > INTRO > DISPLAY.

2.Select a display mode (60 CLOSE or BRIGHT).

∙When in the “60 CLOSE” setting, the LCD’s backlight will turn off after 60 s.

∙When in the “BRIGHT” setting, the LCD’s backlight will stay on.

1.Go to MENU > INTRO > INFO.

2.The display will show Edition.

3.Press <ENTER> to see the installed software version.

-12- Q-Spot™ 560-LED User Manual Rev. 06