Q-Wash 560Z-LED QRG

About This Guide

The Q-Wash 560Z-LED Quick Reference Guide (QRG) contains the product’s connection and mounting information, as well as the menu options and the DMX values.

Refer to this product’s User Manual for detailed information and instructions. You can download the User Manual from the

CHAUVET® website: www.chauvetpro.com.

Disclaimer Read ALL the disclaimers and Safety Notes in this document, as well as those in the product’s User Manual before installing, operating, or maintaining this product.

Safety

Notes

What Is Included

DO NOT open this product unless instructed. It contains no user serviceable parts.

DO NOT look at the light source when this product is on.

DO NOT touch the product when it is operating because it may be hot.

DO NOT cover the ventilation slots when the product is operating to avoid internal overheating.

DO NOT install or operate this product where there is less than 50 cm to the nearest surface to allow adequate ventilation around it.

DO NOT leave any flammable material within 50 cm from this product while operating or connected to the power outlet to minimize the risk of fire.

DO NOT carry this product from the head. Use the handles instead. DO NOT mount this product overhead without using a safety cable.

DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it.

DO NOT operate this product if you see damage on the housing, lenses, or cables. In any of these cases, have the damaged parts replaced by an authorized technician at once.

DO NOT connect this product to a dimmer or rheostat.

ONLY connect this product to a grounded and protected circuit.

One Q-Wash 560Z-LED

One IEC Power Cord with Edison Plug (US market)

One Safety Cable

Two Omega Brackets

Warranty Card

Quick Reference Guide

Page 2 of 8

Page 2
Image 2
Chauvet 560Z-LED manual Safety What Is Included, About This Guide