Chauvet 560Z-LED manual Features AC Power, Mounting

Q-Wash 560Z-LED QRG

Features

AC Power

Fuse Replacement

Mounting

Product

Mounting

Diagram

12 or 15-channel RGBWA LED moving yoke wash product Pan: 540

Tilt: 270

RGBWA color static mixing with or without DMX control Vector speed channel for RGBWA color mixing Variable zoom

Variable electronic strobe

Continuously variable electronic dimmer (0~100%) Built-in automated programs

Remote product reset and vector speed channel 255-step fully customizable program

Recall auto or custom programs via control panel or DMX Color temperature presets (3,200~10,000 K)

This product has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz.

1.Disconnect the unit from the power outlet.

2.With a flat head screwdriver, wedge the fuse holder out of the housing and remove the blown fuse from the holder.

3.Replace the blown fuse with a fuse of the exact same type and rating.

4.Insert the fuse holder back in place and reconnect the power.

Before mounting this product, read the Safety Notes at the beginning of this guide and on page 2 of the product’s User Manual. Then, follow the mounting procedure indicated in the Setup chapter of the User Manual.

Safety cable (included)

C Clamps (not included)

Omega brackets (included)

Overhead Mounting Floor Mounting

Page 3 of 8