Chauvet DMX-4 LED user manual Orientation, Rigging

Mounting

Orientation

The DMX-4 LED may be mounted in any position, provided there is adequate room for ventilation.

Rigging

Be sure that the structure can support the weight of the fixture. Please see the “Technical Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This may be done with a screw, nut and bolt, or a hanging clamp. The hole in each bracket is 13 mm in size. When rigging consider routine maintenance and control panel access. Please see the following notes on installation.

∙The back plate may be reversed for an alternate rigging configuration. See the section on the following page for details on how to do this.

∙Safety cables must always be used.

Mounting bracket

3. Setup 7 12/10/2010 5:16 PM