Mounting ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of
the fixture by loosening both knobs and tilting the fixture. After
finding the desired position, retighten both knobs.
NOTE!
CLAMP IS SOLD SEPARATELY.
• When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
• Safety cables must always be used.
• Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
INCLUDED MOUNTING BRACKET
Safety Cable
Attachment Points
Intimidator Spot 2.0 HTI Manual 12 2007-01-24/09:36