Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
Fuse Replacement
With a
holder from its housing. Remove the damaged
fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in
its place and reconnect power.
The fuse is located inside this compartment. Remove using a flat head screwdriver.
FUSE
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
xWhen selecting installation location, take into consideration lamp replacement access and routine maintenance.
xSafety cables should always be used.
x | Never mount in places where the fixture will be exposed to rain, high | Note! |
Clamp is sold separately. | ||
| humidity, extreme temperature changes or restricted ventilation. |
|
4.OPERATING INSTRUCTIONS
1)Use the moonflower mode switch to set the mode of rotation (up = continuous rotation mode, down =
2)Use the gobo mode switch to set the mode of rotation (up = continuous rotation mode, down =
3)Turn the focusing lens to focus the beam onto your projection surface.
SX Mix Manual | 7 |
