4.OPERATING INSTRUCTIONS
Control To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control
Panel panel.
Operation |
|
|
|
|
|
|
|
|
Button |
|
|
|
|
| Function |
| |
|
|
|
|
|
|
| ||
| <MENU> |
|
| Press to find an operation mode or to back out of the current menu |
| |||
|
|
| option |
|
|
|
| |
|
|
|
|
|
|
|
| |
| <UP> |
|
| Press to scroll up the list of options or to find a higher value |
| |||
| <DOWN> |
|
| Press to scroll down the list of options or to find a lower value |
| |||
| <ENTER> |
| Press to activate a menu option or a selected value |
| ||||
Menu Map |
|
|
|
|
|
|
|
|
Mode |
|
| Programming Steps | Description |
| |||
|
|
|
| |||||
|
|
|
|
| AuF | Automatic Mode, Fast |
| |
| Automatic |
|
|
| AuS | Automatic Mode, Slow |
| |
| Programs |
|
|
| Sou | Sound Active Mode |
| |
|
|
|
|
| rdn | Random Effect Mode |
| |
| Sound |
|
| S 0 |
| S | Adjust sound sensitivity for |
|
| Sensitivity |
|
|
| Mode |
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
| rgb |
|
|
|
|
|
|
|
| (r |
|
|
| Manual LED |
|
|
|
| (g | Manually adjust the LED color and strobe rate |
|
|
|
| LEd |
| (b |
|
| |
| Control |
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FdE | Manually adjust the LED color fade speed |
|
|
|
|
|
|
|
| ||
| DMX |
| 001 |
| Set DMX starting address |
| ||
| Addressing |
|
|
| ||||
|
|
|
|
|
|
|
| |
| Slave Mode |
|
|
| SLA | Sets Slave Mode |
| |
Configuration
(DMX)
Starting
Address
Set the product in DMX mode to control with a DMX controller.
1.Connect the product to a suitable power outlet.
2.Turn the product on.
3.Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
The Eclipse™ RGB uses up to 12 DMX channels in its
If you are not familiar with the DMX protocol, download the DMX Primer from the www.chauvetlighting.com.
To select the starting address, do the following:
1.Press <MENU> repeatedly until 001 shows on the display.
2.Press <ENTER>.
3.Use <UP> or <DOWN> to select the starting address.
4.Press <ENTER>.
Rev. 8 ML | 12 | Eclipse™ RGB User Manual |
