![](/images/new-backgrounds/1299444/29944417x1.webp)
Operation
DMX Operation
This operating mode will allow for control with an external DMX controller. You must set the starting address for this mode.
If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
Please see the instructions below for details on this mode.
1.Plug the fixture into power.
2.Plug a DMX controller into the fixture in a daisy chain configuration.
3.Press <MODE> until Addr appears on the LED screen.
4.Press <ENTER>.
5.Using <UP>&<DOWN>, select the DMX starting address.
6.Press <ENTER>.
DMX Channel Values
CHANNEL |
| VALUE |
| FUNCTION | |
|
|
|
| Pod 1 | |
|
| 000 010 |
| Blackout | |
|
| 011 045 |
| Red | |
1 |
| 046 080 |
| Green | |
| 081 115 |
| Blue | ||
|
| 116 150 |
| Yellow | |
|
| 151 185 |
| Magenta | |
|
| 186 220 |
| Cyan | |
|
| 221255 |
| White | |
|
|
|
| Pod 2 (run speed when CH.8 is between 011~239) |
|
|
| 000 010 |
| Blackout |
|
|
| 011 045 |
| Red |
|
2 |
| 046 080 |
| Green |
|
| 081 115 |
| Blue |
| |
|
| 116 150 |
| Yellow |
|
|
| 151 185 |
| Magenta |
|
|
| 186 220 |
| Cyan |
|
|
| 221255 |
| White |
|
|
|
|
| Pod 3~6 | |
|
| 000 010 |
| Blackout | |
|
| 011 045 |
| Red | |
3~6 |
| 046 080 |
| Green | |
| 081 115 |
| Blue | ||
|
| 116 150 |
| Yellow | |
|
| 151 185 |
| Magenta | |
|
| 186 220 |
| Cyan | |
|
| 221255 |
| White | |
7 |
|
|
| Strobe |
|
| 000009 |
| No function |
| |
|
| 010255 |
| Strobe (slow~fast) |
|
|
|
|
| Mode | |
|
| 000010 |
| Individual pod control with strobing (channels 1~7) | |
|
| 011047 |
| Automatic 1 | |
|
| 048095 |
| Automatic 2 | |
|
| 096119 |
| Automatic 3 |
8120144 Automatic 4
145167 Automatic 5
168191 Automatic 6
192215 Automatic 7
216239 Automatic 8
240255
4. Operating Instructions | 9 | 1/13/2011 5:38 PM |