3.SETUP
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
Fuse Replacement
1)With a flat head screwdriver wedge the fuse holder out of its housing.
2)Remove the damaged fuse from its holder and replace with exact same type and rating fuse.
3)Insert the fuse holder back in its place.
4)Reconnect power.
Replacing Gobos
1)Remove the gobo cover.
2)Remove the
3)Using a small tool, pry the tension ring from the gobo holder.
4)Remove the old gobo.
5)Insert the new gobo, and replace in the reverse steps of removal.
8 | 9/22/2009 3:57 PM |
