Chauvet QSPOT user manual Menu Map, Intro

Menu Map

MAIN FUNCTION	SUB-FUNCTION	SELECTION	INSTRUCTION
	1.1 Address	000 ~ 255	Sets the DMX starting address
	1.2 Reset	Yes ~ No	Resets the fixture to the “home” position
		DMX-512	Sets the fixture to DMX mode
		Auto_1	Sets the fixture to hanging auto mode (for
			placing on speaker)
		Auto_2	Sets the fixture to floor standing auto mode
			(pointing down)
		Sound_1	Sets the fixture to hanging sound mode (for
			placing on speaker)
	1.3 Operation
		Sound_2	Sets the fixture to floor standing sound mode
			(pointing down)
1-Intro		Custom	Sets the fixture to run the user program
		Test	Sets the fixture to run a standard test
			program
		Slave	Sets the fixture to respond to other “Master”
			units
	1.4 Channels	Advanced	8-bit pan/tilt operation
		Basic	16-bit pan/tilt operation
		60 close	Turns the display backlight off after 60
			seconds of being idle
	1.5 Display
		Bright	Sets the display backlight to remain on
			indefinitely
	1.6 Info	Edition	Shows the software version
	2.1 Pan	Normal	Sets the Pan operation: 0º ~ 530º
		Reverse	Sets the Pan operation: 530º ~ 0º
	2.2 Tilt	Normal	Sets the Pan operation: 0º ~ 270º
		Reverse	Sets the Pan operation: 270º ~ 0º
2-Invert		Step	Sets the COLOR wheel channel to locking
			colors
	2.3 Color
		Linear	Allows split color operation on the color wheel
			channel
	2.4 Use	No ~ Yes	Enables / disables all of the Invert functions:
			<2.1>~<2.3>
	3.1 P/start	000 ~ 255	Sets the Pan starting range
	3.2 P/Finish	000 ~ 255	Sets the Pan end range
3-Range	3.3 T/start	000 ~ 255	Sets the Tilt starting range
	3.4 T/Finish	000 ~ 255	Sets the Tilt end range
	3.5 Use	No ~ Yes	Enables / disables all of the Range functions:
			<3.1>~<3.4>
	4.1 Black	No ~ Yes	Allows the move-in-black function to save via
			DMX
4-Special		DMX	Allows the DMX remote address command to
			be received
	4.2 Reset
		System	Prevents a remote reset commend from
			being received
	5.1 Step	0 ~ 255	Select which step to edit
	5.2 Pan
	5.3 Tilt
	5.4 X/Y_Speed
	5.5 Color		Use the 9 different attributes of the fixture to
5-Edit	5.6 Gobo	000 ~ 255	create a custom program
	5.7 Gobo_Rot
	5.8 Prism
	5.9 Dimmer
	5.10 Strobe
	5.11 Time	000 ~ 255	Selects the duration of the step
	5.12 Use	No ~ Yes	Enables / disables the custom program
6-Default	6.1 Default	No ~ Yes	Sets the fixture back to the factory defaults
			(erases the custom programs)

Q-Spot™ 150-LED User Manual 14 9/22/2009 3:57 PM