At the Rear:

⇒Screwcap Fuseholder

Lamp Retaining Clip

Mounting Bracket

Fig. 1

Introduction

Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide.

Operation

This lighting effect has been designed to function on a mains power supply of either 120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with your local voltage. Check the label on the unit and the power plug for the correct voltage.

When connected to the mains power supply the unit should illuminate.

Replacing Lamps

1.Disconnect from main power supply before attempting to replace lamp.

2.Ensure that the unit is sufficiently cool, before removing blown lamp.

In order to replace the lamp, disconnect from main power supply first, and remove the lamp retaining clip, which is highlighted on the diagram (fig.1). Only use the appropriately rated lamps as use of any other lamp type may cause the unit to be non-operational.

On the rear of the lamp you should find two screw terminals which simply hold the spade connectors attached to the two cables found inside the pinspot when cover and lamp is removed. These terminals must be screwed up tight to ensure good connection. It does not matter which of the two terminals goes to which cable, so you cannot get it the wrong way round.

Finally before switching on, check that the lamp is housed correctly in the lamp holder and that the lamp retaining clip has been replaced.

Optional Accessories

There are a number of optional accessories available from CHAUVET for your new Pinspot including; rotating color wheel (CH-04), and color gels (CL-36). We also supply mirrorballs and motors which provide a great partner for some dazzling effects! Ask your dealer for further details.

Replacing Fuses

If the unit does not function at all when connected to the main power supply i.e. does not illuminate after replacing the lamp. Then it is highly likely that the fuse has blown. Disconnect from main power supply before attempting to replace either lamps or fuse.

In order to replace the fuse, disconnect from the main power supply first, and then unscrew the fuseholder cover to reveal the fuse. The unit has a label attached which indicates the correct fuse rating and you will also find this listed as part of the specifications for the unit later in this guide. It is most important that replacement fuses are of the correct rating. Failure to use the correct fuse could damage the lighting effect beyond economic repair.

The fuse should simply be placed inside the holder and the screw cap replaced, when this is done connect to the main power supply to check. If the unit is still not working then please contact your dealer or CHAUVET for servicing.

Cleaning

The most important part of your lighting effect to keep clean is the lens on the lamp as this allows the light output to transmit. This should be cleaned with a soft damp cloth. The body of the unit may also be cleaned in the same way. We recommend internal cleaning be carried out by a fully qualified technician.

Maintenance & Servicing

Work on internal parts should be carried out by a qualified technician. Removal of any covers other than the lamp replacement access is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the company.

Troubleshooting

•If the unit is not functional – check main power supply is ‘on’ and check fuses.

•If the unit is functional but lamp does not light - lamp may require replacing.

If after trying this solution you still have a problem contact your dealer or CHAUVET.

Caution

No user serviceable parts inside, please refer to CHAUVET for service.

Power Connections

The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration.

Earth = Green/Yellow cable

Neutral = Blue cable

Live = Brown cable

In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 3A fuses.

Page 1
Page 2
Image 2
Chauvet YA-15 Introduction, Operation, Replacing Lamps, Optional Accessories, Replacing Fuses, Cleaning, Troubleshooting
Page 1

YA-15 specifications

The Chauvet YA-15 is a groundbreaking LED wash fixture designed for a wide array of lighting applications, ranging from concerts to theatrical productions. Known for its versatility and exceptional performance, the YA-15 has been a reliable choice for lighting professionals who demand quality and creativity in their designs.

One of the standout features of the YA-15 is its powerful 15W RGBW LED engines. This allows the fixture to produce a stunning array of colors, providing rich and vibrant hues that can transform any environment. The ability to mix colors seamlessly is enhanced by the fixture’s extensive color palette, offering lighting designers the flexibility to create dynamic moods and atmospheres.

The YA-15 also boasts impressive coverage and output. With a wide beam angle, this fixture can saturate large areas with light, making it ideal for both close and distant applications. The fixture’s zoom capability further enhances its usability, allowing operators to adjust the beam angle from a narrow spotlight to a wide wash, depending on the needs of the performance.

In terms of control, the Chauvet YA-15 is equipped with advanced protocols such as DMX, which allows for precise control and synchronization with other fixtures. This feature is particularly useful in complex setups where multiple lights must work in harmony. Additionally, the fixture supports various control modes, offering flexibility for both professional and amateur lighting technicians.

Another noteworthy characteristic of the YA-15 is its rugged design, which ensures durability and longevity even in demanding environments. The robust housing protects the internal components, while the fixture's heat management system allows prolonged use without overheating, ensuring consistent performance during extended events.

The Chauvet YA-15 also incorporates innovative technologies such as flicker-free operation, making it suitable for broadcast applications where image quality is paramount. Its quiet operation further enhances its appeal, allowing it to be used in settings that require minimal noise interference.

With its combination of powerful output, versatile control options, and durable design, the Chauvet YA-15 stands out as a premier choice for lighting professionals. Whether used in concerts, corporate events, or theatrical performances, it delivers exceptional results and elevates the overall visual experience.
Top Page Image Contents