Page 4SKU 3223 For technical questions, please call 1-800-444-3353.
Avoid burns22. . Do not touch the welded stud electrode or work surface until it cools.
Avoid accidental activation23. . Unplug the Stud Welder while inserting the stud electrode
into the Stud Welder.
24. Avoid electrical shock. Do not operate the Stud Welder with its protective case removed.
Do not touch grounded surfaces while operating.
Inhalation Hazard

Welding/Plasma Cutting Produces toxIC fumes and gasses.

exposure to welding or cutting gasses can increase the risk of
developing certain cancers, such as cancer of the larynx and
lung cancer. also, some diseases that may be linked to exposure
to welding or plasma cutting gasses or fumes are:
•early onset of Parkinson’s Disease •Heart Disease
•Damage to the reproductive organs •ulcers
•Inammationofthesmallintestineorstomach •Kidney damage
•Respiratory diseases such as emphysema, bronchitis or pneumonia
safety precautions, such as using natural or forced air ventilation and
wearing an aNsI approved respirator, are esseNtIal to reduce the
risk of developing the above illnesses.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
Note: Performance of this tool may vary depending on variations in local line voltage. Exten-
sion cord usage may also affect tool performance.

Unpacking

When unpacking, check to make sure the following parts are included.
Stud Welder
Slide Hammer Dent Puller
Package of 100 each: 2mm,
3mm, 4mm Stud Electrodes
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
REV 04e