Chicago Electric 42417 Unpacking, W arning

#42417 Pa ge 4

Figure 1

Car Adapter (14)

Locking Trigger Hold (10)

Trigger (11)

Hanging Strap (12)

ABS Housing (1)

Lamp Lid (5)

Tripod Adapter (6)

On/Off with Locking Trigger Hold

Your Spotlight is equipped with a Trigger Hold to allow y ou to hav e the Spotlight on while leaving y our hands free

for work.

Step 1) To turn on your Spotlight, press down on the Trigger (#11). Pressing down on the Trigger (#11)

will engage the Locking Trigger Hold (#10)-see Figure 1. Note: Never leave Spotlight unattended

with the Locking Trigger Hold left on.

Step 2) To release the Trigger Hold (#10), push in on the left side of the Locking Trigger Hold button

(#10) -see Figure 1.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT OPERATE THE TOOL.

Unpacking

UNPACK AND CHECK CONTENTS

When unpacking y our Spotlight-1,000,000 Candle Power chec k to make sure the following parts are included. If

any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.

Parts Listing

Part # Description Quantity Part # Description Quantity

1 ABS Housing 1 8 Switch 1

2 Reflector Plastic 1 9 Battery 1

3 Bulb 1 10 Locking T rigger Hold 1

4 Glass 1 11 Trigger 1

5 Lamp Lid 1 12 Hanging Strap 1

6 T ripod Adapter 1 13 Power Adapter 1

7 Circuit Board 1 14 Car Adapter 1

The Spotlight is powered b y a battery which will have a long lif e span. When the battery is no longer

functioning, it should be removed from the Spotlight and properly recycled. Many states require

recycling. Contact your local solid waste authority for information on recycling.

Before disposing of the battery , wrap exposed terminals with heavy tape to prevent a shorting condition,

which could cause fire and/or injury.

NEVER EXPOSE THE BA TTERY TO HIGH HEAT OR FIRE; BATTERY MA Y EXPLODE UNDER THESE

CONDITIONS. REV 11/02 REV 05/05