440 lb. | 880 lb. |
Single Line
Configuration
ject being pulled, and kink or fray the cable.
6.Stand clear, and when it is safe to do so, use the power Switch in the Handle Base to retract the cable, and hoist the item as desired.
Figure 6
7.Wind the cable properly around the spool.
8.Leave at least 3 turns of the cable around the reel, to prevent the cable from coming unattached to the reel.
9.If you are unable to lift a load, do not continue to operate the power switch. This can result in damage to the mo- tor.
Double Line
Configuration
MAINTENANCE
1.Lubricate the cable occasionally with a light oil. Check that it is in good condition.
2.Check to be sure the hoist is properly attached to its mounting pole. Make sure the bolts are tight.
3.Periodically check the condition of the electrical cords, plugs and controls.
PLEASE READ THE FOLLOWING
CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY: NETHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT: IN FACT THE MANUFACTURER A ND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO.
SKU 44006 | For technical questions, please call | Page 6 |
