Chicago Electric 46804 operating instructions

9.Make sure the Drill bit being used is free from burrs and any other foreign matter which could damage the tool.

10.Never leave the Drill unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

11.Always unplug the Drill from its electrical outlet before performing and inspection, maintenance, or cleaning procedures.

12.Let Bits cool before touching changing or adjusting them. Bits heat up dramatically while in use, and are capable of severe burns.

13.Do not force the Drill. This tool will do the work better and safer at the speed and capacity for which it was designed.

14.Always secure the workpiece in a vise or other appropriate device; never attempt to hold the workpiece in your hand while drilling.

15. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pace- maker could cause interference to or failure of the pacemaker.

16. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of Califor- nia) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

SKU 46804 For technical questions, please call 1-800-444-3353. Page 6