Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
may damage the housing. To prevent electrical shock, do not allow water or other liquids to enter the motor vent holes.
4.The grease in the gearbox will require replacement after extensive use of the grinder. Have the tool serviced by a qualified technician for this procedure.
5.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.Periodically blow dust and grit out of the motor vents using dry compressed air. Always wear
3.After Use, wipe external surfaces of the tool with a clean cloth. Do not use solvents or harsh cleaners as they
Page 16 | For technical questions, please call | SKU 67648 |
