Assembly
Installing the Wheel Guard
TO PREVENT SERIOUS INJURY:
Do not operate this tool without the Wheel Guard properly installed.
1
Wheel Guard (3)
2
| 3 | Socket Head |
| Hex Wrench | |
Gear Housing Rim | (55) | Bolt (4) |
| ||
|
|
Figure 2
1.Using the Hex Wrench (55), loosen the Socket Head Bolt (4) and slide the collar of the Wheel Guard (3) over the rim of the Gear Housing.
2.Rotate the Wheel Guard as needed to shield you during the planned work.
3.Use the Hex Wrench (55) to tighten the Socket Head Bolt securely. Check the Wheel Guard to ensure it is firmly in place. Adjust if necessary before proceeding.
Installing the Auxiliary Handle
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or without the Auxiliary Handle properly installed.
Auxiliary Handle locations
Figure 2
1.The Auxiliary Handle (23) may be installed in one of three positions, on either side or on top of the Gear Housing.
2.Screw the threaded end of the Auxiliary Handle into the selected position. Tighten securely before beginning work.
SKU 67648 | For technical questions, please call | Page 13 |
