Specifications
Electrical Input |
| 120 V~ / 60 Hz / 11 A |
|
|
|
Motor No Load Speed |
| 7,800 RPM |
|
|
|
Max. Accessory |
| 7” |
Diameter |
| |
|
| |
Arbor Hole Diameter |
| 7/8” |
Spindle Thread |
| 5/8” x 11 TPI |
|
| 95GA |
| E194601 | |
This angle grinder can be used for grinding steel, stone or ceramic workpieces such as pipe, iron steel bar, household bricks and tiles. Do not attempt to grind wood or a soft metal such as lead. The material will quickly fill the disc and render it useless.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Components
Spindle Lock |
|
| ||
Button (21) | ||||
Grinding Wheel | Carbon Brush | |||
Switch (46) | ||||
(Sold Separately) | Cap (41) |
|
| |
| Trigger | Handle | ||
| (43) | |||
| (47) |
| ||
Wheel Guard (3) |
|
| Hex Wrench | |
|
|
| (55) | |
Figure 1 | Spanner (53) | |||
Auxiliary Handle (23) |
| |||
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Page 12 | For technical questions, please call | SKU 67648 |
