SAFETY
SETUP
OPERATION
Specifications
Electrical Rating | 120V~ / 60Hz / 7.5A | DB5703 | |
| |||
Motor No Load Speed | 4200 RPM |
| |
|
| 5″ (125mm) Maximum | 3114052 |
Blade Diameter | Use ONLY blades specifically |
| |
|
| designed for this Double Cut Saw |
|
| PVC Pipe | up to 1″ |
|
| Copper Pipe | up to 1″ |
|
Cutting | Steel Pipe | up to 1″ |
|
Corrugated Sheet | Standard Thickness |
| |
Capacities |
| ||
Sheet Steel | up to 14 gauge |
| |
|
| ||
| Sheet Aluminum | up to 1/8″ |
|
| Oak Wood | up to 3/4″ |
|
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly
1. Find the Side Handle mounting | 2. Use Nut and Washer to connect the Side |
hole on the side of housing. | Handle Support to the housing. |
Mounting
Hole
MAINTENANCE
Page 8 | For technical questions, please call | SKU 68316 |
