Chicago Electric 68316 Tool Set Up - Blade Installation, Operating Instructions, Maintenance

SAFETY

SETUP

OPERATION

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Tool Set Up – Blade Installation

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before adjusting tool or installing accessories.

TO PREVENT SERIOUS INJURY FROM FLYING FRAGMENTS:

Do not use abrasive blades or masonry-cutting blades. The guards of this saw are not designed to protect against the failure of such blades.

1. Press the Spindle Lock Pin on the outside of the	3. Open the Lower Blade Guard and
housing. Turn blade slowly until pin locks back	lift and remove Blade B.
into place.

A

B

2. Unscrew the Lock Nut, turning it counterclockwise.

4. Lift up and remove Blade A.

B

MAINTENANCE

A

Page 10 For technical questions, please call 1-800-444-3353. SKU 68316