Work Piece and Work Area Set Up
1. Designate a work area that is clean and well‑lit. | 2. | Secure loose work pieces using a vise or clamps |
The work area must not allow access by children |
| (not included) to prevent movement while working. |
or pets to prevent distraction and injury. | 3. | There must not be objects, such as utility lines, |
|
nearby that will present a hazard while working.
General Operating Instructions
SAFETY
1.Slide the Direction Switch (which should initially be centered in the “lock” position) to the right for forward drilling/fastening, or to the left for reversing the operation. Use the “reverse” setting only to remove screws or to release jammed drill bit.
2.The LED Work Light can be activated before the Driver runs by pressing the Trigger lightly. Then press the Trigger harder to activate the Impact Driver.
3.The Impact Driver has variable speed. To increase speed, apply more pressure to Trigger. To decrease speed, lessen pressure on Trigger.
4.When finished using the Impact Driver, release the Trigger and center the Direction Switch to lock the trigger mechanism as a safety measure.
5.Remove the Battery Pack.
6.Clean then store the Impact Driver indoors and out of children’s reach.
SETUP
OPERATION
MAINTENANCE
Item 68853 | For technical questions, please call | Page 9 |
