INSPECTION, MAINTENANCE, AND CLEANING
1.NOTE: Preventative maintenance procedures and frequency will vary depending on the amount of Generator use. Refer to the Engine manufacturer’s Operation, Maintenance, and Parts manual (included) for detailed information regarding maintenance of the Engine.
2.CAUTION! Always turn off the Engine and remove the Ignition Key. Allow sufficient time for the Engine and Generator to completely cool. Then, disconnect the negative battery cable from the battery before performing any inspection, maintenance, or cleaning.
3.BEFORE EACH USE, inspect the general condition of the Generator. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
4.BEFORE EACH USE, check to make sure the Engine’s oil level is adequate. Refer to the Engine manufacturer’s Operation, Maintenance, and Parts Manual (included) for specific information.
5.DAILY: With a soft brush, cloth, or vacuum, remove all debris from the Generator. Then, use a premium quality, lightweight machine oil to lubricate all moving parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 90300 For technical questions, please call | PAGE 17 |
