Specifications
Rated Output | 14.5 | V~ / 15 W | |
(working) | |||
| |||
Open Circuit Voltage | 23.5 | OCV | |
Adapter Outlets | 3, 6, 9 and 12 VDC | ||
Note: Output will decrease as the panel gets hotter than room temperature (~70° F). Angle, solar intensity, cloud cover and other factors will effect output
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
to children to prevent electric shock. Build a childproof enclosure if needed.
3.Install the charge controller/regulator and batteries in a weatherproof enclosure with proper ventilation.
Mounting
1.Angle the face of the panel toward true south1 according to the chart that follows:
Latitude | Solar Panel Angle |
10° | |
Latitude + 5° | |
Latitude + 10° | |
Latitude + 15° | |
65° or more | 80° |
Assembly
6a
Installation
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Location
1.Locate the panel where it will receive full, unobstructed sunlight, especially during midday. Nearby trees or tall plants will drop debris, requiring the panel to be cleaned more frequently.
2.The installation location for the panels, charge controller/regulator, and batteries must be inaccessible
Slot 3
6b
1.Slide the Left and Right Triangle Frame (6a and 6b) into slot 1 and slot 3 on both ends of the Top Link Bar (6d) and Bottom Link Bar (6C) (to form the frame assembly). See above.
1Angle towards true north if installed in southern hemisphere.
SKU 90599 | For technical questions, please call | Page 5 |
